HTSII-2L plastic detergent bottles /shampoo bottles extrusion blow molding machine
Technical Parameters:
The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable.
The hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable.
The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform.
The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable.
The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.
Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision product.
Components list:
a) Hydraulic Part
Oil Pump--------------------------------------------------YUKEN, Japan
Valve-------------------------------------------------------YUKEN, Japan
Hose, Joint------------------------------------------------PARKER SIR, America
Sealer------------------------------------------------------Top DZ, Europe
b) Electrical Parts
Microcomputer Control System------------------------MITSUBISHI PLC, Japan
Touch Screen ---------------------------------------------HITECH color screen, Taiwan
Temperature Controller---------------------------------MITSUBISHI, Japan
Conductor-------------------------------------------------SCHNEIDER, France
Air Switch-------------------------------------------------SCHNEIDER, France
Motor------------------------------------------------------SIMENS BEIDE Asynchronous Motor, Japan
Power Resource------------------------------------------MEAN WELL, Taiwan
Inverter---------------------------------------------------MITSUBISHI, Japan
c) Pneumatic Parts
Solenoid Valve--------------------------------------------FESTO, Germany
Cylinder---------------------------------------------------FESTO, Germany
d) Parison wall thickness controller
Parison controller 100 point----------------------------MOOG, Japan
Extrusion blow molding machine specification:
| Model No. |
HTSII-2L |
| Max. Product Volume(L) |
2L |
Max. Die of Diameter(mm) |
90 |
| Dry cycle(pc/h) |
900 |
Die heat capacity(KW) |
1.8 |
| Screw Diameter(mm) |
60 |
No. of heating zone |
3 |
| Screw L/D ratio (L/D) |
25 |
Central distance of bi-head(mm) |
130 |
| Screw drive power(KW) |
15 |
Max. Die Diameter(bi-head)(mm) |
50 |
| Screw heating capacity(3ΦKW) |
5.04~6.7 |
No. of heating zone |
5 |
| No. of heating zone |
3 |
Heating capacity(KW) |
2.3 |
| Output of HDPE(kg/h) |
60 |
Blowing pressure(Mpa) |
0.6 |
| Oil pump drive power(KW) |
5.5 |
Air volume(M3/min) |
0.4 |
| Clamping force (KN) |
40 |
Cooling water pressure(Mpa) |
0.2~0.3 |
| Mold Stroke(mm) |
370 |
Water consumption(L/min) |
35 |
| Max. Size of Mold(W*H) (mm) |
300*320 |
Size of machine(L*W*H) (m) |
3.2*2.12*2.55 |
| Capacity(L) |
|
Weight of machine(TON) |
6 |
Extrusion blow molding machine installation, commissioning and training:
If the buyer needs seller to send technicians to workshop for supervising the erection and start-up, seller must support and send sufficient number of technicians and keep duration of stay in workshop. Usually it's about 3~5 days in this duration. The first day is that when our technician is at the airport to factory of buyer. And from the first day, the buyer has to pay US$50 per day. And all accommodation, visa application & air ticket will be born by the buyer.
Pesan Anda harus antara 20-3.000 karakter!
